WB Mini

INJEPRO expands its range of products and introduces the new WB Mini in its version WITHOUT display.

More compact and precise for tuning your project, providing savings, performance, and safety.

The WB Mini is a wideband lambda sensor reader and conditioner that monitors the air/fuel mixture of the engine.

Its communication is via CAN network with the modules from the INJEPRO line, allowing closed-loop corrections.

Additionally, it features a 0-5V analog output, enabling configuration of the equivalence table for operation in programmable modules from other brands.

Have more configuration possibilities with the option of using a wideband 4.2 or 4.9 sensor.

Acquire the WB Mini and make the most of your project.

Readings in lambda (0.55λ to 2.50λ); CAN communication with modules from the INJEPRO line; Analog output 0-5V (0.55λ to 2.50λ); Dimensions: 55mm (width) x 20mm (depth) x 40mm (height); Compatible with the Bosch LSU 4.2 wideband lambda sensor (PN: 0258007057 or 0258007351) and 4.9 (PN: 0 258.017.025).

T 4000

​Integrated wideband sensor conditioner; Sequential injection up to 4 cylinders and semi-sequential up to 8 cylinders; Launch functions. Additionally, it features a 5-inch touch-sensitive display with an authentic instrument panel, designed to enhance practical viewing with numerous configuration options. It provides data such as: speed, RPM, gear, sensor channels, actuators, among other information

T 5000

Considering the current market demands, Injepro introduces a new product, the T5000. An injection system designed to deliver high quality and reliability, combining an ergonomic and updated appearance with exceptional functionality.

Through its 5-inch touch screen, you can analyze real-time engine information in a very precise and detailed manner. Its polished ABS casing ensures optimization wherever the module is installed.

The T5000 boasts numerous features, including electronic throttle control, stepper motor management, connection for up to 4 Type K Thermocouple sensors, EBC, EGS, individual cylinder correction, and sequential injection and ignition for up to 8 cylinders.

It includes a 34-pin automotive connector with 10 inputs and 16 signal outputs, allowing all functions to be enjoyed to their fullest potential.

Its software is unified with our new 'T' line.

T 10000

You can acquire your new T10000 right now and make the most of your project with a state-of-the-art injection module.

• 5-inch 800x480 touchscreen display;

• Panel with 19 displays (11 numeric, 7 digital, and 1 accelerometer);

• Integrated progressive shift-light with 10 RGB LEDs;

• 4 side RGB LEDs, allowing configuration of up to 9 alerts (expandable to 16 in future versions);

• Aluminum casing;

• 20 configurable inputs;

• 30 configurable outputs:

  • 9 0-5V/1A outputs for ignition or general use;

  • 5 0-12V/1A outputs for electronic throttle, stepper motor, or general use;

  • 16 Negative/5A outputs for injectors, solenoids, and others;

• Integrated Bluetooth (Medium range, 8 meters obstacle-free);

• Internal conditioner for up to 8 pyrometers;

• Integrated Strain Gage conditioner, responsible for reading the sensor installed on the lever and sending the signal to the module.

• Configuration of 3 injector banks, allowing two sequential banks up to 8 cylinders with a third semi-sequential bank;

• Closed-loop injection control per cylinder (up to 8 cylinders);

• Individual injection and ignition adjustments per cylinder (up to 8 cylinders);

• Initial configuration assistant on the device's screen;

• Map configuration directly on the device's screen;

• Two CAN Communication Inputs;

• Internal wideband sensor conditioner;

• Integrated accelerometer;

• Integrated EBC and EGS functions;

• Internal datalogger that allows recording up to 80 of the 150+ sensor and actuator channels, with individual sampling rate configuration per channel;

• Comes with software for configuring all module parameters, including 3D maps